¡Todo en uno! 
Me pregunto cómo habrán resuelto el tema de la limpieza. No me imagino imprimiendo algo en 3D después de haber fresado algo que lo ha dejado todo sucio de polvo y virutas.
Size: 366x366x366mm
Printing volume (additive) : 210x240x240mm (24% of size in additive mode)
Milling Volume (subtractive) : 210x240x[your milling bit height] mm
Scan volume (optical/digitalizer) : up to printing volume depending on the object shape
Scan Angular resolution: from 83 to 133 steps/degree in 1/16th microstepping mode.
CMOS Camera sensor: 5mpx.
4th axis Milling angular resolution: as "Scan Angular resolution"
Z layer height: from 0.10 to 0.4 mm.
Z level min. increments: encoder resolution 0,00047mm (0,47 microns) in 1/16th microstepping.
(3mm pitch leadscrew / 200 steps *16 * 2 gearbox = 0,000467 = approx 0.47 microns,less than half a micron)
Additive materials: PLA,ABS : built in filament storage.
Subtractive mode - materials: with onboard motor: foam, balsa, plywood, thin Aluminium, brass alloys (PCB layer).
Additive head: 0.35 or 0.45 or 0.5mm nozzle , Bowden extruder
Additive sub-systems: heated bed, fan cooling
Subtractive tool: Onboard Spindle.
Additional tool/heads: Space up to 60mm mounting diameter.
Acquisition method: Laser Scanner (line laser) and Z digitizer probe.
Other systems: Mechanical homing endstops,
vacuum cleaner port.I/O : USB host, SD slot, Wireless b/g/n, Ethernet
Colors: White, Black, Red
No estoy seguro pero parece que tiene algún tipo de conexión para una aspiradora
